Downloads

Express 6 Manual

Express 6 Manual (PDF)

StarDot Tools Software

StarDot Tools Version 1.4.4

Express 6 Firmware

express6-5407-1.1.52.bin

Notes (Read Before Upgrading):

1. To upgrade the firmware, you must use the latest copy of the StarDot Tools software (above) and the Express 6 must be on a local network (Ethernet). Run StarDot Tools, right-click on the Express 6 in the list, select "Upgrade Firmware" and follow the on-screen instructions. DO NOT power off the Express 6 during the upgrade process as this may leave the Express 6 inoperable.
   
   
2. After upgrading the firmware, you will have to re-enter all of the existing settings (IP address, FTP information, etc). If your camera is not on a DHCP network, you may need to use the null serial cable that shipped with the Express 6 to reassign the IP address.